The proportional integral derivative temperature control allows precise temperature control from RT+5°C to 99.9°C with use of the cover.
A high limit thermostat is provided and can be set to prevent heater runaway in the event of temperature control failure. The pump activity allows and exceptional temperature uniformity ±0.3°C.
The proportional integral derivative temperature control allows precise temperature control from RT+5°C to 99.9°C with use of the cover. A high limit thermostat is provided and can be set to prevent heater runaway in the event of temperature control failure. The pump activity allows and exceptional temperature uniformity ±0.3°C. The tray is easily removable. The interior of the bath is constructed of stainless steel and is designed for operation with sterile distilled water or equivalent. The body is made from galvanized steel and is painted for added protection. A drain is located at the far left hand end of the bath. A stainless steel gable cover is also provided with the bath. The 240 volt units are identical in appearance to the 120 volt units. Double layers of stainless steel (External body paint coating or not) Top cover: SUS with 8 open holes for crucible (Ø 9 cm) Stainless steel ring cover to close those holes Bath Capacity: >25L Temperature range: RT+5C to +99.9C , accuracy variance ±0.1C Light signal to display steps with result display Cut off when overtemperature safety system Time range 1 min to 99 hours Controller electronics integrated into the immersion thermostat Timer system and continuous run Smallest possible unit footprint Easy clean interior Optimised cover shape No rust possible Easy cleaning, no height restrictions