Our Shaking Water Baths are delivered with spring wire rack or flask clamps for linear shaking. The heater and the recirculating pump allows a perfect uniformity of the temperature around the samples. No elements weld to the stainless steel bath and its round corners makes it easy to clean. A drain is also incorporated to aid emptying of the bath. The platforms will accomodate the following Erlenmeyer flask sizes: 50, 125, 250, 500 or 1000ml capacity.
The speed and temperature controls are easy to use. The shaking speed is adjustable and electronic feedback via LED digital display ensures accurately maintained speed and water temperature. In addition, the design incorporates an over temperature protection system that tracks the set temperature and controls the heater in the event of a fault.
A choice of stainless steel cover is also available, designed to reduce heat loss and evaporation.

Model

Temperature Range
DL Temperature Range
Temperature Fluctuation
Temperature Uniformity
Temp. Control Accuracy
Controller
Alarm
Shaking Speed
Amplitude
Flasks
Water Circulation
Heating capacity
DL Cooling capacity
Overview Dimensions
DL Overview Dimensions
Working Volume
DL Working Volume
Interior Material
Exterior Material
Cover
Flasks
Safety Device
Power

SB-5D/DL

RT+5°C - +99.9°C
+10°C - +99.9°C
±0.5°C @ 25°C
±0.5°C @ 25°C
±0.1°C
PID microprocessor
High Temperature Alarm
20 - 200rpm
25mm
50ml=6 / 125ml=4 / 250ml=2 / 500ml=1 / 1L=1
In built recirculating pump
1000W
W465 x D290 x H260mm
10L
Stainless Steel #304
Coated steel
SUS gable cover
Of your choice
Overheat / Over load protection / Slow start/stop motor
Adapted to the user electric system

SB-7D/DL

RT+5°C - +99.9°C
+10°C - +99.9°C
±0.5°C @ 25°C
±0.5°C @ 25°C
±0.1°C
PID microprocessor
High (Low for DL) Temperature Alarm
20 - 200rpm
25mm
50ml=16 / 125ml=9 / 250ml=6 / 500ml=3 / 1L=2 / 2L=1
In built recirculating pump
1000W
Adapted to temperature range
W745 x D350 x H380mm
W780 x D365 x H810mm
21L
25L
Stainless Steel #304
Coated steel
SUS gable cover
Of your choice
Overheat/overlow protection (DL) / Over load protection / Slow start/stop motor
Adapted to the user electric system

SB-9D/DL

RT+5°C - +99.9°C
+10°C - +99.9°C
±0.5°C @ 25°C
±0.5°C @ 25°C
±0.1°C
PID microprocessor
High (Low for DL) Temperature Alarm
20 - 200rpm
25mm
50ml=24 / 125ml=12 / 250ml=9 / 500ml=6 / 1L=4 / 2L=2
In built recirculating pump
1500W
Adapted to temperature range
W890 x D440 x H440mm
W890 x D435 x H815mm
35L
52L
Stainless Steel #304
Coated steel
SUS gable cover
Of your choice
Overheat/overlow protection (DL) / Over load protection / Slow start/stop motor
Adapted to the user electric system