The 740-F Series is characterized by the versatility of his use while maintaining an exceptional environment uniformity. The user is free to set the interior of the chamber as he wants. Arabidopsis, insect incubation, seed storage, tissue culture storage, plant growth chamber, constant temperature chamber, every settings are possible. The desired number of shelves and lights can be installed at any height, the air circulation will be always the same, this is the particularity of the 740-F Series.

Thanks to its side wall plenum air flow, an exceptional environment uniformity is maintained at each level of the growth chamber. The 740-F Series has been designed for the scientist conscious of detail and accuracy of his experiments. It is for this reason that a host of features are programmable from the 4.3″ color touchscreen panel.

740-F SERIES ARABIDOPSIS

The small leaves tightly bunched together is a very compelling study.

Thanks to his design the 740-F Series
allows unrestricted access for measurements.

  • Included 4 growth areas (Shelves: W60*D70)
  • Shelves easily adjustable / removable
  • Individually programmable lighting by couple of lights
  • T8: ON/OFF (option dimmable: 10% to 100%)
  • LED: 10% to 100% dimmable
  • Growth area 1.68m²
  • Standard growth height 250mm (LED: 300mm)
  • Standard humidity up to 90%RH with lights (for FH version)
740-F Series AIR CIRCULATION

The 740-F Series has optimized air flow, provided by centrifugal impellers, directed to each growth area (horizontally) via side wall plenum. Thanks to this Side to Side air flow, the 740-F Series obtains the best temperature and humidity uniformity of the market. The exceptional uniformity is not the only advantage of this incredible air flow system. In the other growth chamber, the air circulates from back to front and has to find space between the doors and the shelves to reach the ceiling where the blower are placed. Furthermore, when the scientist open the door the air is forced outside the chamber, which involve quick environment changes. In the 740-FH, as there is no obstacle against the air circulation, the air is not going out when the door is opened, therefore the growth chamber uses less energy to operate, that means life span of the motor elements extended, so more environmentally friendly. The Side to Side air circulation system is adjustable to maintain the same air flow at every level even if you change the disposition of your shelves.

740-F SERIES INSECT INCUBATION CHAMBER

The 740-F Series is equipped with a tempered glass door with tight light cover to observe the inner room without changing environment conditions. Contact us for optional high frequency lights to limit stroboscopic effects on the insects.

  • Included 4 areas
  • Shelves easily adjustable / removable
  • Shelf area 1.68m²
  • Individually programmable lighting by couple of lights
  • Standard humidity range 50% – 95%RH
740-F SERIES SEED STORAGE CHAMBER

The 740-F Series standard version is adapted to the seed storage, optionally the perfect dry conditions can be achieve for long term storage.

  • Included 4 areas
  • Shelves easily adjustable / removable
  • Shelf area 1.68m²
  • Standard +5°C to +10°C (lower temperature in option -20°C)
  • Standard humidity range 50% – 95%RH (the seeds have to be kept in dry environment)
  • Side to Side air circulation
  • Air velocity adjustable

740-F SERIES PLANT GROWTH / TISSUE CULTURE CHAMBER

The 740-F Series produced by Taiwan HiPoint is based on proven standards and technologies. Ergonomics, user-friendly interface, PID microprocessor control type with multi-programming and multi-steps has been developed and tested with the utmost rigor.

  • Included 4 growth areas
  • Shelves easily settable (removable)
  • Individually settable lighting by couple of lights
  • T8: ON/OFF (option dimmable: 10% to 100%)
  • LED: 10% to 100% dimmable
  • Growth area 1.68m²
  • Standard growth height 250mm (LED:300mm)
  • Standard humidity up to 90%RH (Lights ON)
  • The number of Growth or Culture areas can be increase on demand.

740-F SERIES LIGHTING SYSTEM

740F Series LED SUN LIGHT Z1

Each plant are different, then need adapted light. That’s why at Taiwan HiPoint, we always try to give the best lighting system solution for our customers and their research topic.

  • LED, T5, T8 settings are available
  • Lights canopy easily commutable
  • LED intensity adjustable from 10% to 100% (In option for fluorescent lamp)
  • T5 / T8 intensity adjustable by couple of lamps
  • LED SUN LIGHT Z1 (White, Red, Green or Blue) Many wavelengths available on request
  • Intensity up to 150μmols‾¹m‾² @ 15cm for LED / 200μmols‾¹m‾² @ 15cm for T8 (6pcs)
  • For Higher light Intensity, please check the 740F Series 3W LED

Options

  • High Intensity LED Lights(1 light):
          >700umols‾¹m‾²@30cm
          >1400umols‾¹m‾²@15cm
  • RGB control / 8 channels control
  • PAR control
  • Ultra low temperature
  • Low Humidity level control
  • CO2 / Other gas control
  • Analog outputs 4 - 20mA
  • Access ports of various diameter
  • Remote Control
  • CCD camera and morphology analyzer
  • Antimicrobial surface

Model

Temperature Range
Temperature Fluctuation
Temperature Uniformity
Temp. Control Accuracy
Humidity Range
Humidity Uniformity
Humidity Control Accuracy
Humidifier Type
CO2 Control Range
Light Type
Light Intensity
Light Control
Program
Alarm
Data
Remote Control
Cooling System
Overview Dimensions
Working Volume
Interior Material
Exterior Material
Insulation
Door
Growth Area
Growth Height
Safety Device
Power

740F

0°C - +60°C
±0.2°C @ 20°C
±0.5°C @ 20°C
±0.1°C
--
--
--
--
--
T8 / LED SUN LIGHT Z1
>150 umols-1m-2 @150mm (400 - 700nm)
ON / OFF or 10% to 100% programmable
Multi programs - multi steps
High and Low Temperature Alarm
Data Export by USB port
Direct connection to unit by LAN to control HMI ( by Internet in option)
Air or water cooled condensing unit / CFC free refrigerant
W870 x D800 x H1980mm
483L
Stainless Steel #304
Steel powder coating
PUF insulation
Door with heated tempered glass observation window to avoid condensation
4 growth areas (1.68m2)
30cm adjustable (2.5cm steps)
Overheat protection and low temperature protection / Door open alarm / Over load protection / Compressor delay start protection
Adapted to the user system

740FC

0°C - +60°C
±0.2°C @ 20°C
±0.5°C @ 20°C
±0.1°C
--
--
--
--
From ambient to 5000ppm
T8 / LED SUN LIGHT Z1
>150 umols-1m-2 @150mm (400 - 700nm)
ON / OFF or 10% to 100% programmable
Multi programs - multi steps
High and Low Temperature, CO2 level alarm
Data Export by USB port
Direct connection to unit by LAN to control HMI ( by Internet in option)
Air or water cooled condensing unit / CFC free refrigerant
W870 x D800 x H1980mm
483L
Stainless Steel #304
Steel powder coating
PUF insulation
Door with heated tempered glass observation window to avoid condensation
4 growth areas (1.68m2)
30cm adjustable (2.5cm steps)
Overheat protection and low temperature protection / Door open alarm / Over load protection / Compressor delay start protection
Adapted to the user system

740FH

0°C - +60°C
±0.2°C @ 20°C
±0.5°C @ 20°C
±0.1°C
50% - 95% RH
±2%
±0.1%
Ultrasonic Humidifier
--
T8 / LED SUN LIGHT Z1
>150 umols-1m-2 @150mm (400 - 700nm)
ON / OFF or 10% to 100% programmable
Multi programs - multi steps
High and Low Temperature, Humidity alarm
Data Export by USB port
Direct connection to unit by LAN to control HMI ( by Internet in option)
Air or water cooled condensing unit / CFC free refrigerant
W870 x D800 x H1980mm
483L
Stainless Steel #304
Steel powder coating
PUF insulation
Door with heated tempered glass observation window to avoid condensation
4 growth areas (1.68m2)
30cm adjustable (2.5cm steps)
Overheat protection and low temperature protection / Door open alarm / Over load protection / Compressor delay start protection
Adapted to the user system

740FHC

0°C - +60°C
±0.2°C @ 20°C
±0.5°C @ 20°C
±0.1°C
50% - 95% RH
±2%
±0.1%
Ultrasonic Humidifier
From ambient to 5000ppm
T8 / LED SUN LIGHT Z1
>150 umols-1m-2 @150mm (400 - 700nm)
ON / OFF or 10% to 100% programmable
Multi programs - multi steps
High and Low Temperature, Humidity and CO2 alarm
Data Export by USB port
Direct connection to unit by LAN to control HMI ( by Internet in option)
Air or water cooled condensing unit / CFC free refrigerant
W870 x D800 x H1980mm
483L
Stainless Steel #304
Steel powder coating
PUF insulation
Door with heated tempered glass observation window to avoid condensation
4 growth areas (1.68m2)
30cm adjustable (2.5cm steps)
Overheat protection and low temperature protection / Door open alarm / Over load protection / Compressor delay start protection
Adapted to the user system